MTM Gun Vise and Workstation

This workstation incorporates a sturdy vice allowing any type of gunsmithing or maintenance needed for your airrifle, rifle or shotgun. This vice is packed full of all the features you find in more expensive models.

The MTM Gun Vise features a fast, single adjustment clamp down and a secure non-marring hold. The gun forks are positioned high and low giving the option of a level clamp up for maintenance, or a sloped clamp up for drainage.

Organize your cleaning supplies with the 14 separate compartments, including a small divided tray that slides to uncover more compartments in the base for smaller, easy to lose items. Made of rugged, chemical and solvent resistant polypropylene plastic, the MTM Gun Vise is made to last.

Gun Vise

Shooting Table

Standing 30 inches tall and weighing less than 15 pounds, the Predator Shooting Table was designed by shooters. Modeled after a traditional bench rest, the wedge shaped tabletop design provides a comfortable shooting position for either left or right-handed shooters.

Once your rifle is set up, you can rest it in one of the three barrel grooves molded into the sides of the table. Doubling as a maintenance bench the MTM Predator Shooting Table is ideal for sighting-in and testing your rifles performance.

Shooting Table

MTM Predator Gun Rest

The MTM Predator Shooting Rest, with its exclusive solid four-legged stance, provides the stable, rock-solid gun rest that shooters demand of expensive heavy metal rifle rests, only at a fraction of the weight (3.5 pounds).

This rest is lightweight and fully adjustable. The shooting rests butt stock support not only levels the rest to uneven surfaces but also adjusts to fit any size of rifle.

A precision dialed height adjuster allows the shooter to zero in for pinpoint accuracy. The advanced design of the Predator's front rubber shooting pad offers solid contact with just about any shaped stock or barrel.

Predator Gun Rest

Flambeau Maintenance Box and Rest

This shooters box is ideal for shooters who wish to keep all their airgun spares and accessories in one place.

The lid folds back allowing you to mount the gun holding brackets in to place.

This maintenance box is ideal for those of you who need a good rest to clean and maintain your rifles as well as something to carry your tools and cleaning gear in.

The fold out tray system allows you to have a place for each individual item.

Flambeau Maintenance Box

Plano Shooters Box and Rest

This shooters case come gun rest should be large enough to hold all your cleaning supplies.

The lid folds back allowing you to mount the gun holding brackets in to place.

This shooters case come gun rest is ideal for those of you who need a good rest to clean and maintain your rifles as well as something to carry your tools and cleaning gear in.

Colour - Green

Approx dimensions:
Height 27cm Length 56cm Width 32cm

Plano Shooters Box and Rest

Gun Bench Rest

This sturdy fully adjustable benchrest provides an affordable, means to rest a rifle for cleaning, routine maintenance and shooting applications. It features fully adjustable legs, support rods and the rear is vertically adjustable for change in elevation. Both sides of each cradle are notched to hold any size cleaning rods.

The steel construction holds the rifle steady. It features a matt black weatherproof finish.

When in use the rifle butt and stock are protected by rubber insulation on the supporting ‘Y’ shaped rests

Gun Bench Rest

Shooting Rest Bags

These rest bags are ideal for holding guns or for use as a rest to shoot off. The front and rear bag ensure the rifle stops in place either while cleaning or shooting.

Super-tough 600 denier nylon construction with non skid bottom keeps them in place.

The bench rest bags come unfilled but can be filled with either dried corn cob or polystyrene balls.

Front bench rest bag
(pictured top right)
Sorry Temp out of stock

Rear bench rest bag
(pictured top left)

FatBag Bench Rest

This robust well designed rest bag is ideal for those shooters who wish to take steady shots. The bag once filled helps grip the rifle and hold it in place allowing the shooter maximum control.

- Super-tough 600 denier nylon construction
- Non skid bottom keeps bag in place

The FatBag bench rest bag comes unfilled but can be filled with either dried corn cob or polystyrene balls.

FatBag Bench Rest

Caldwell Tack Driver™
Shooting Bench Rest Bag

The most user-friendly and effective, one-piece shooting bench rest bag available. This convenient shooting bag takes the place of two. You can use the Tack Driver
almost anywhere, from portable and permanent shooting benches to makeshift
positions in the field.

· Self-tightening surface grips your rifle and reduces felt recoil
· Non-marring, non-slip surface will not harm your rifle’s finish
· Supports almost any rifle or shotgun type
· Shoulder carrying strap included

The Tack Driver bench rest bag comes unfilled but can be filled with either dried corn cob or polystyrene balls.

Caldwell Tack Driver™
Shooting Bench Rest Bag

Caldwell Dead Shot
Shooting Bench Rest Bags

Every hunter and shooter is looking for a versatile and steady shooting system that
can be set up almost anywhere, and at any time. Whether you have minutes or
seconds to set up for your next shot, the DeadShot Shooting Bags are the answer.
These inexpensive and functional bags continue to set the industry standard for
quality and functional shooting bags.

· Made of durable, water-resistant polyester.
· Front bag dimensions: 10” wide x 8 1/2” high x 6” deep.
· Rear bag dimensions: 5” wide x 5” high x 4 1/2” deep

The Caldwell Dead Shot bench rest bags come unfilled but can be filled with either dried corn cob or polystyrene balls.

Caldwell Dead Shot
Bench Rest Bags